The Electricity at Work Regulations 1989 require UK employers to ensure that electrical systems are constructed, maintained and used so as to prevent danger. Work on electrical systems must be carried out by a competent person, and staff who use electrical equipment need appropriate information and training. Electricity causes a significant number of workplace fires, serious injuries and fatalities each year, and most incidents are preventable through good management.
Why electrical safety matters
Electricity is so familiar that its dangers are easily underestimated. Contact with live parts can cause electric shock and burns, and faults can cause fires and explosions. Even low voltages can be fatal in the wrong circumstances, and an electric shock can cause a fall from height or other secondary injury. Electrical faults are also a leading cause of accidental fires in commercial premises, which links electrical safety closely to fire safety. Managing the risk protects both people and property.
The Electricity at Work Regulations 1989
The Electricity at Work Regulations 1989, often abbreviated to EAWR, are the main legislation governing electrical safety at work. They place duties on employers, the self employed and employees to prevent danger from electricity. Electrical systems must be of suitable construction for the conditions they will face, maintained so as to prevent danger, and only worked on by people with the knowledge and experience to do so safely. The regulations apply to all electrical systems and equipment, from fixed wiring and distribution boards to portable appliances.
Who counts as a competent person
A competent person for electrical work is someone with the technical knowledge, training and experience to carry out the work safely and, just as importantly, to recognise when a task is beyond their ability. For most electrical installation, repair and testing work this means a qualified electrician, often registered with a recognised competent person scheme. General employees are not competent to carry out electrical work. Their role is to use equipment correctly, carry out simple visual checks, report defects, and never attempt repairs themselves.
PAT testing: what employers need to know
Portable appliance testing, commonly called PAT, is the inspection and testing of portable electrical equipment to ensure it is safe to use. A widespread misconception is that the law requires PAT testing at fixed annual intervals. In fact, there is no specific legal requirement to PAT test at set intervals. The EAWR requires that equipment is maintained to prevent danger, and inspection and testing is one way to achieve that. The correct approach is risk based: combine simple user checks for obvious damage with periodic formal inspection and testing where the risk justifies it. Higher risk equipment, and equipment used in harsh environments or on construction sites, needs checking more often than, say, a desktop computer in an office.
Electrical safety training requirements
Employers must provide information, instruction and training so staff can use electrical equipment safely. For most employees this is awareness level training covering:
- Recognising hazards: damaged cables and plugs, overloaded sockets, scorch marks, overheating equipment and water near electrics.
- Safe use: using equipment as intended, not overloading sockets or extension leads, and keeping liquids away from electrical items.
- User checks: carrying out a simple visual check of plugs, cables and casings before use.
- Reporting and isolation: reporting defects promptly, removing faulty equipment from use, labelling it clearly, and never attempting repairs.
Common electrical hazards at work
The most common electrical hazards include damaged or worn cables and plugs, overloaded sockets and daisy chained extension leads, inadequate or unsuitable equipment for the environment, water and wet conditions near electrics, and unsafe working practices such as untrained staff attempting repairs or working on equipment that has not been isolated. Temporary and trailing cables are a frequent problem, creating both electrical and trip hazards. Recognising these everyday risks is the focus of awareness training.
Fixed wiring inspection
As well as portable equipment, the fixed electrical installation, meaning the wiring, sockets, distribution boards and so on, must be maintained to prevent danger. This is usually achieved through periodic inspection and testing carried out by a competent electrician, resulting in an Electrical Installation Condition Report. The frequency depends on the type of premises and how it is used. Keeping these reports, acting on any faults identified, and tracking when the next inspection is due are all part of managing electrical safety properly.
How to conduct an electrical risk assessment
An electrical risk assessment identifies the electrical equipment and systems in use, the people who could be harmed and how, and the controls needed. It should consider the working environment, the condition and maintenance of equipment, the competence of those using and working on it, and the inspection and testing regime in place. The assessment guides how often equipment is checked and what training staff need, and it should be reviewed regularly and after any change or incident. As with all risk assessments, the significant findings should be recorded where you employ five or more people.
Frequently asked questions
- Is electrical safety training a legal requirement at work: Employers must provide information, instruction and training so staff can use electrical equipment safely under the EAWR 1989 and wider health and safety law.
- What is PAT testing and who needs to do it: PAT is inspection and testing of portable equipment. There is no fixed legal interval; a risk based approach to maintenance is required.
- Who can carry out electrical work in a workplace: Only a competent person with the necessary knowledge, training and experience, usually a qualified electrician.
- What is the Electricity at Work Regulations 1989: The main UK law requiring electrical systems to be constructed, maintained and used so as to prevent danger.
- How often should PAT testing be done: There is no set interval. The frequency depends on the type of equipment and the environment, decided through risk assessment.
- Do I need to test the fixed wiring as well as appliances: Yes. The fixed installation must be maintained, usually through periodic inspection and testing by a competent electrician.
Featherstone Safety Hub's evidence library stores PAT and electrical inspection certificates with expiry tracking, and its awareness training library on the Complete plan includes an electrical safety course.
Start your free 14 day trial of Featherstone Safety Hub.
Keep electrical safety inspection-ready
Featherstone Safety Hub helps you assess electrical risks and store PAT and inspection certificates with expiry tracking, so everything stays inspection-ready. Start a free 14-day trial →
Working on energy infrastructure or around major electrical equipment? See energy infrastructure health and safety consultancy, backed by two super grid transformer installations.
