The Health and Safety at Work Act 1974 and the Management of Health and Safety at Work Regulations 1999 require employers to provide adequate health and safety training, including when workers start a new job. A health and safety induction should be completed on or before a new employee's first day, because new starters are statistically more likely to be involved in an accident in their early days at work. This guide explains the legal duty, what an induction must cover, and how to do it properly.
Why induction matters
Research and accident statistics consistently show that workers are at greater risk of injury when they first start a job. They are unfamiliar with the workplace, its hazards, its equipment and its procedures, and they may be reluctant to ask questions or admit they do not know something. A good health and safety induction directly addresses this heightened risk by giving new starters the essential knowledge they need to work safely from the very beginning, before they are exposed to hazards they have not yet been trained to handle.
What the law says about induction training
Employers have a clear legal duty to provide health and safety training. The Management of Health and Safety at Work Regulations 1999 specifically require that employees are provided with health and safety training when they are recruited, and on being exposed to new or increased risks. The Health and Safety at Work Act 1974 underpins this with the general duty to provide such information, instruction, training and supervision as is necessary to ensure, so far as is reasonably practicable, the health and safety of employees. An induction is how employers meet this duty at the start of employment.
What a health and safety induction must cover
A good induction gives new starters the essential information they need to work safely from day one. It typically covers:
- Emergency procedures: fire evacuation routes, alarms, assembly points, what to do in an emergency, and first aid arrangements including who the first aiders are.
- Key risks and controls: the main hazards of the workplace and the specific role, and the control measures in place to manage them.
- Welfare and facilities: toilets, rest areas, drinking water and other welfare provisions.
- Accident and hazard reporting: how to report accidents, near misses and hazards, and why doing so matters.
- Responsibilities: the worker's own health and safety duties and who is responsible for health and safety in the organisation.
- Role specific procedures: safe systems of work, personal protective equipment, and any task specific training needed before starting particular tasks.
Induction versus job specific training
It is helpful to distinguish the general induction from job specific training. The induction gives every new starter the baseline they need, such as emergency procedures and reporting, regardless of their role. Job specific training then covers the particular risks and safe systems of work for the tasks that person will actually do, for example operating a specific machine, using chemicals, or working at height. A new starter should not carry out a task that carries significant risk until they have received the relevant job specific training, even if they have completed the general induction.
Common induction gaps that cause accidents
New and young workers are at higher risk of accidents because they are unfamiliar with the workplace, its hazards and its procedures. Common gaps include rushing or skipping the induction when someone starts at short notice or during a busy period, failing to cover role specific risks and assuming the worker will pick them up, assuming experienced hires already know local procedures when every workplace is different, and not following up to check that the new starter actually understood what they were told. Each of these leaves a new worker exposed, which is why a structured, recorded induction with a check on understanding is so important.
How to document an induction properly
Records are important both for safety and to demonstrate compliance. Good practice is to use an induction checklist that lists each topic to be covered, which the new starter and the person delivering the induction both sign and date to confirm that each item has been covered and understood. This creates evidence that the legal duty has been met, helps ensure that nothing is missed even when different people deliver inductions, and provides a clear record if there is ever an investigation, an insurance claim or an inspection. The signed checklist should be kept on the employee's file.
Contractor and temporary worker inductions
The duty to provide health and safety information extends beyond permanent employees. Contractors, agency staff and temporary workers also need an induction appropriate to the work and the site, covering the hazards they may encounter, the site rules, and the emergency procedures. For agency workers, health and safety responsibilities are shared between the agency and the host employer, but the host employer must ensure that site specific risks and procedures are covered before work begins. A site induction for contractors is a standard and important part of managing shared workplaces safely.
Refreshing induction after a role change
Induction is not only for new recruits. The Management Regulations require training when workers are exposed to new or increased risks, for example through a change of role, the introduction of new equipment or processes, or a transfer to a different site or department. Treating a significant role change like a focused mini induction, covering the new risks and procedures the person will face, keeps the worker safe and keeps the employer compliant. It is easy to overlook this for existing staff, but a long serving employee moving to an unfamiliar task faces many of the same risks as a brand new starter.
Frequently asked questions
- Is a health and safety induction a legal requirement in the UK: Yes. Employers must provide health and safety training on recruitment under the Management of Health and Safety at Work Regulations 1999.
- What must be covered in an H&S induction: Emergency procedures, the main workplace and role risks and controls, welfare, accident and hazard reporting, responsibilities, and relevant safe systems of work.
- Can new starters begin work before induction: They should receive a health and safety induction on or before their first day, before being exposed to risks they have not been trained for.
- How do I record that an induction took place: Use a signed and dated induction checklist confirming each topic was covered and understood, and keep it on file.
- Do contractors and agency staff need an induction: Yes. They need a site appropriate induction covering hazards, site rules and emergency procedures before work begins.
- Is induction needed when an existing employee changes role: Yes, where the change exposes them to new or increased risks, a focused induction covering those risks is required.
Featherstone Safety Hub records health and safety induction completion for every employee in its training matrix, with evidence and dates.
Start your free 14 day trial of Featherstone Safety Hub.
Induct every new starter — and prove it
New starters are most at risk in their first days. Featherstone Safety Hub is health and safety software for UK small businesses that delivers a consistent induction to every new starter and contractor and records it automatically. Start a free 14-day trial →
